Capex WireMore than $126 billion in U.S. capital projects on the map, with new ones every day. Just $9.90/month, cancel anytime.Subscribe ›
Thursday, Nov. 19, 2026 · U.S. editionNov. 19, 2026How we reportLog inSubscribe to Capex Wire

U.S. capital projects before the bid list closes.

Semiconductors & Electronics · NY

TE Connectivity will invest more than $60 million in an optical connectivity plant in Henrietta, New York.

The company will convert a vacant former Sam's Club into a fiber optics research and manufacturing site, with more than 800 jobs expected in Monroe County.

Quick answer

TE Connectivity plc: $60 million investment in Henrietta, N.Y. Stage: Announced. Timeline: Announced Nov. 12, 2026. Opening planned for spring 2027. Manufacturing ramps up through 2031. Likely to buy: electrical, process cooling and hvac, cleanroom construction, low voltage and controls.

Fiber optic patch cables connected to a data center patch panel
Illustrative photo. Photo: Brett Sayles / Pexels

By Capex Wire StaffPublished 2 min read

TE Connectivity plc will invest more than $60 million to convert a vacant former Sam's Club in Henrietta, New York, into a research and manufacturing facility for optical connectivity products, the company said Nov. 12, 2026.

The 135,000 square foot building sits at 1600 Marketplace Drive in Monroe County, just outside Rochester. TE Connectivity (NYSE: TEL) said the site will develop and produce fiber array units and other optical connectivity products built to serve hyperscale AI data center operators and cloud providers, building on fiber array unit technology the company recently acquired from RAM Photonics.

What is being built

"This investment strengthens our capabilities in optics and complements our copper portfolio, enabling us to provide a range of signal connectivity solutions that are vital to enabling next-generation data centers," said TE Connectivity CEO Terrence Curtin. "We have seen significant interest in our optical connectivity technology among data center customers and this new facility will enable us to increase our capacity in engineering and manufacturing to support design awards and expected growth."

Capex Wire

Get there first: every project owner on the U.S. Project Map.

Hundreds of projects have not broken ground yet. See who is building each one, with address, design firm and source, before the bid list closes.

more than $126 billion

in announced or filed value

Subscribe for $9.90/month

Cancel anytime in one click.

Jobs and timeline

TE Connectivity's release says the company plans to employ more than 800 people in engineering, manufacturing and management at the site. FingerLakes1 cited state and local economic development material that puts the number higher, at more than 860 jobs, with Monroe County Executive Adam Bello and Greater Rochester Enterprise President and CEO Matt Hurlbutt both involved in the announcement. The company expects to open the building in spring 2027 and ramp up manufacturing through 2031.

ItemFigure
InvestmentMore than $60 million
JobsMore than 800 (company); more than 860 (state and local materials)
Building size135,000 square feet
Excelsior tax creditsUp to $22 million
OpeningSpring 2027

Who is building it

No contractor, architect or process engineering firm has been named for the conversion. Converting a big box store into an optics manufacturing and R&D site typically requires new electrical service, process cooling, cleanroom construction and specialized utility work, and that bid list is still open.

Incentives

Empire State Development is offering up to $22 million in performance based Excelsior Jobs Tax Credits, tied to the company's job creation commitments over time, according to FingerLakes1. Monroe County and Greater Rochester Enterprise are also assisting the company with the Henrietta project, FingerLakes1 reported. Gov. Kathy Hochul said in the company's release, "TE Connectivity's investment will bring more than 800 jobs to Monroe County and turn a vacant building into a home for cutting-edge manufacturing."

What happens next

TE Connectivity has not filed a public construction schedule, site plan or permit application. The spring 2027 opening target means site work and equipment installation would need to begin well before then. No bid packages have been announced.

Project fileNY
Owner
TE Connectivity plc
Investment
$60 million (more than $60 million, per the company's Nov. 12, 2026 release; FingerLakes1 cites more than $62 million)
Location
Henrietta, Monroe County, New York
Type
Manufacturing and R&D facility conversion, optical connectivity products
Stage
Announced
Timeline
Announced Nov. 12, 2026. Opening planned for spring 2027. Manufacturing ramps up through 2031.
Contractor / EPC
Not announced
Sources
PR Newswire / TE Connectivity, FingerLakes1

Why it matters

Converting a big box retail building into cleanroom manufacturing space means electrical, cooling and interior fit out work bidding before the spring 2027 opening, with more than 800 jobs and a multiyear ramp through 2031 pointing to sustained local hiring.

What this project buys

  • Electrical
  • Process cooling and HVAC
  • Cleanroom construction
  • Low voltage and controls
  • Interior fit out
  • Process equipment installation

When to approach: No contractor or site plan announced yet. Site work and equipment fit out would need to begin well before the spring 2027 opening.

Typical scopes for a project of this type. This is an editorial estimate, not a list of awarded or advertised packages.

Frequently asked questions

Where is the new TE Connectivity plant?

At 1600 Marketplace Drive in Henrietta, New York, a Monroe County suburb of Rochester, inside a vacant former Sam's Club building.

How many jobs will the Henrietta facility create?

TE Connectivity's own release says more than 800 jobs in engineering, manufacturing and management. State and local economic development material cited by FingerLakes1 puts the figure at more than 860.

When will the TE Connectivity Henrietta plant open?

The company expects to open the 135,000 square foot building in spring 2027, with manufacturing ramping up through 2031.

Who is building the TE Connectivity facility in Henrietta?

No contractor, architect or engineering firm has been announced. TE Connectivity has not said who will convert the building.

What will TE Connectivity make in Henrietta?

Fiber array units and other optical connectivity products aimed at hyperscale AI data center operators and cloud providers, built on technology the company recently acquired from RAM Photonics.

Sources

More capital projects